In the second half of 19, Dingzhou ruiquan solid waste treatment Co., Ltd. ordered a feed pump from our company, and the pump arrived at ruiquan in early December. Our after-sales engineering normal workers arrived at the site with the pump. Because the flow of the two feed pumps running on the site could not meet the normal operation of the boiler, they needed to replace the pump as soon as possible. The standard workers were on-site for 24 hours to guide the installation, measure the foundation, align and align, and install the pump in the shortest time, The test run was successful. The flow of one pump met the water volume of two boilers on site, and the operation was stable. It was found that the bypass valve technology was obsolete during installation. It was suggested to replace it with the minimum flow valve to more reliably protect the operation of the feed pump. At the same time, the engineer also trained the on-site operators on the matters needing attention during pump operation and the replacement of the mechanical seal to prevent the impact of operational errors.

After replacing the feed pump of rose pump, the power consumption to the whole ruiquan company decreased by 3%. Li Lin, general manager of the group, also thanked fan Gong on the spot and promised that the whole group would replace the feed pump of rose pump in the future!